The PDX650 from Kanto is a full motion TV wall mount that allows
your flat screen TV to sit a mere 2″ from the wall.
LOW PROFILE DESIGN
With a unique tilt head designed to nestle into the frame, the PDX650 TV wall mount will let you push your flat screen TV within 2” of the wall. The H frame assembly provides maximum access for cable connections.
FITS VESA SIZES TO 600 x 400
With its adjustable bracket arms, the PDX650 accommodates VESA sizes from 200×100 to 600×400.
EXTENDS ALMOST 22 INCHES
Even with its low-profile design the PDX650 can extend almost 22” from the wall, giving you plenty of room for tilting and swivelling your TV, or for reaching out from alcoves.
SUPPORTS 125 POUNDS
With its solid steel construction, this durable TV wall mount is designed and tested to hold up to 125 pounds. Even at maximum weight and full extension, your TV will remain in place with no sag.
SWIVELS 80 IN EITHER DIRECTION
The articulating arms allow you to pivot your TV up to 80° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you’ve found the best viewing angle, tighten the nuts to secure your TV in place.
SLEEK CABLE MANAGEMENT
Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides – whatever works best.
EVERYTHING YOU NEED
We supply you with everything except a toolbox to ensure that your installation goes smoothly. Instruction manuals are provided in English, French, and Spanish, as well as the parts you need to mount your TV safely and securely. Easy-to-follow online videos and phone support are available to assist you along the way.
CONVENIENT BOLT PACK
The PDX650 includes a labeled bolt pack with a variety of bolt diameters and lengths, as well as several spacers to allow a custom fit. Lag bolts and concrete anchors are provided so you can mount to wood studs and concrete walls.
Rotate the 360 degree image below.
TV Sizes: 37” to 75”
Weight Allowance: 125 lbs (57 kg)
VESA Sizes: 200×100 to 600×400
Wall Plate: 22″ (56 cm); Accommodates dual studs with up to 16″ spacing
Tilt: +15° to -3°
Swivel: 80° in either direction, dependent on TV size
Extension: 21.8″ (55.3 cm) from the wall
Profile: Sits 2″ (5 cm) from the wall
Integrated cable management
Adjustable horizontal leveling
Paper wall template for marking pilot holes
All mounting hardware for wood stud and concrete installation
Warranty: 5 years
Weights and Measurements
Shipping box weight: 24.7 lb (11.2 kg)
Shipping box dimensions: 29.4” x 15” x 2.8” (74.6 x 38 x 7 cm)
Product weight: 22.5 lb (10.2 kg)
UPC: 800152713038 (Black); 800152713045 (White)
Make sure to check back here often whenever installing (or reinstalling) your product to make sure that you have the most up to date manual. Changes could include ratings, installation procedures, etc.
VESA stands for Video Electronics Standard Association. At its basic core, VESA is a family of standards for mounting flat panel monitors, televisions and other displays to stands or wall mounts. To find out your VESA pattern size, simply measure the distance between the center of screw holes on the back of your TV on a vertical and horizontal plane. For example, if your screw holes are 200mm apart both vertically and horizontally, your VESA size is 200 x 200.
Yes you can. All of the TV mounts from Kanto come with the appropriate hardware to install your mount into both wooden studs and concrete walls.